A blog about boats, fishing, water sports and having fun on the ocean
Is vinyl wrapping a boat a good idea?
by
Boaters have had almost 40 years to decide, and the results are in — vinyl wraps are leaving paint in the past. Boat owners and marine professionals choose vinyl wraps for several reasons. The many advantages of boat wraps include creative freedom, easy application, low cost and functionality.
Wraps tend to last 3-5 years, and even longer on vertical surfaces like the hull of a boat. The life of wrap depends on several factors including quality of printing materials, installation, care and exposure to elements.
Is it cheaper to wrap or paint a boat?
Wrapping your boat usually costs a fraction of what you would pay for a paint job. As a rule of thumb, the more complex your design is, the more expensive the paint job will be. It makes sense because painting an intricate design by hand takes a lot of work and time.
1: A vinyl boat wrap will protect the boat’s original paint/gelcoat finish. You won’t get UV damage to the original finish and the vinyl will also help protect from minor scratches to the original finish as well.
Is vinyl wrapping a boat a good idea? – Related Questions
Is wrapping a boat better than painting?
Generally, good vinyl is more fade-resistant than paint. Many wraps come with warranties that they won’t fade for at least 5-7 years. With vinyl, solid colours have better fading resistance than metallic colours.
Can you wrap a boat below the waterline?
Yes they are done all over successfully above the water line with out clear coating if you want the vinyl to stak put below the water line you have to clear it to the hull.
Is boat wrap the same as car wrap?
Installing a boat wrap provides so many more challenges than a vehicle wrap installation. Boats have much deeper curves and channels, more exposed and cumbersome hardware all of which create additional levels of difficulty. Boats are typically sitting on a trailer during install which can be a major obstacle at times.
Can you vinyl wrap over gelcoat?
Vinyl wrapping is the process of attaching large sheets of vinyl film to a boat with adhesive over existing paint or gel coat. Already popular with luxury cars and speed boats, the demand for vinyl boat wrap is increasing among yacht owners.
How do you prep a boat for vinyl wrap?
Can you wrap a Fibreglass boat?
Boat motor wraps involve wrapping boats in a self-adhesive film which is a proven, durable and economical alternative to painting or repainting your boat. Vinyl films can be applied to metal, fiberglass/gelcoat, paint and prepared timber surfaces. Using boat motor wraps is quick and easy to apply.
We have found in the past that these surfaces have a very high failure rate and we suggest having them painted by a professional first. Bondo and unpainted fiberglass are also poor surfaces for wrapping unless they are painted. Wrap vinyl likes to stick to smooth, glossy, painted surfaces best.
Do boat wraps fade?
Additionally, vinyl boat wraps don’t fade, get cloudy like some marine paints. And they don’t damage your original paint job, either.
How long does it take to wrap a boat?
How long does boat wrapping take? In most cases, vinyl wrapping a boat between 2-3 days.
How much would it cost to paint a 17 foot boat?
So you would ask yourself, ‘How much does it cost to paint a boat? ‘. If you choose to avail of professional services, the topside painting costs $100 to $400 per linear foot, while the bottom painting varies from $15 to $100 per linear foot. Doing it DIY has an estimate of $2 to $10 per square foot.
Can you wax a wrapped boat?
Polishing your wrap: If you decide to polish or wax your wrap to give it an extra shine, you’ll want only to use the most gentle and high-quality formula that you can find. Additionally, you should make sure the formula is acceptable to use on vinyl and is marine safe. Make sure never to use an abrasive wax.
Will vinyl wrap stick to aluminum?
The short answer to this question: Yes, you can install car wraps over bare metal.
Some people purchase application fluid, and others make their own with soap and water. If you choose to make your own, you can add three drops of soap for every one liter of water for the right solution. If you add too much soap to the mixture, it can counteract the adhesive properties in the vinyl.
Can you vinyl wrap aluminum boat?
We’re often asked what type of boat vinyl can be applied to, and the answer is, almost any. Whether it’s painted finish, fibreglass with gelcoat or an aluminium boat like this, vinyl is equally well suited to nearly all types of substrate.
Can you vinyl wrap over rust?
Can My Vinyl Wrap Be Applied to a Rusted Car? To put it simply, no. Rust not only jeopardizes the structure of your vehicle but covering it up will trap moisture inside and continue to spread the problem across the car. Not only that but when you apply vinyl to a vehicle the main adhesive works on paint.
How do you prepare rust for vinyl wraps?
Sand, Prime, And Paint- Or Wrap!
The only solution is to repair the damage before moving further. The first step is to sand away the offending rust and blemishes. Once the source of the rust is gone, apply a primer to the spots. After the primer dries, you can decide if you would prefer to wrap or paint the vehicle.