Remove tank/aquarium from the box. Carefully remove your tank from its box and place in a safe spot.
Put your tank /aquarium in position.
Rinse all gravel and ornaments.
Fill your tank.
Turn on filter (and heater if applicable)
Add in treatments.
Let the tank cycle.
Keep testing your water.
Is tap water OK for fish tank?
Most municipalities treat drinking water with either chlorine or chloramine for disinfection purposes. Chlorine is extremely toxic to fish and needs to be completely removed before the water comes in contact with fish. Chloramine is chlorine bonded to ammonia, both of which are detrimental to fish.
Can you put fish in a new tank right away?
In the beginning, only add a couple of small hardy fish. Wait until both the ammonia and nitrite levels have risen and then fallen to zero before adding more fish. It usually take about 3-6 weeks for a new aquarium to go through the initial nitrogen cycle, so fish should be added only a few per week during this time.
What do I need to set up a fish tank? – Related Questions
What do you do with your first fish tank?
Unpack and setup your tank.
Then open all the boxes, clean it all off and get ready to go. Fill your fish tank with water once all of your equipment is set up, and let it settle for a day or so so you can make sure that everything is working properly and that nothing leaks. All this should take you a couple hours.
How long should a tank be set up before fish?
Use ammonia and bacteria in combination and only add fish on the day when ammonia and nitrite have both risen previously and then register zero on test kits. This may take between two and six weeks.
How long does a fish tank need to sit before you put fish in it?
You will need to cycle the tank water for four to six weeks so the tank can maintain a healthy biological and chemical balance. Doing this before adding the fish can help to ensure your new fish stay happy and healthy in their new environment. You can find cycling kits for aquariums at your local pet store or online.
What fish is easiest to take care of?
In particular, guppies, zebrafish, goldfish, mollies, neon tetras, betta fish, and suckerfish are just some of the easiest fish to take care of in a community aquarium. Make sure to create a tank with plenty of rocks, caves, small toys, and plants to provide enrichment for the fish.
Do I leave the fish in the tank while cleaning?
It’s best to keep your fish in the fish tank when you clean. Removing them causes unnecessary stress for your fish, and you run the risk of accidentally hurting them. It is possible to keep your fish in the tank while you clean because you don’t need to remove all the water to clean the tank properly.
Depending on how many fish you have, and how messy they are, most tanks require cleaning about once every two weeks. Cleaning should involve: ✔ Siphoning the gravel to remove any debris and uneaten food, and changing about 10-15% of the water.
How do I know if my fish is happy?
Generally speaking, following are some of the ways you can tell if your fish are happy.
They swim back and forth freely and energetically around the tank.
Quite like humans, happy fish might have a vibrant glow to their skin.
They do not appear fearful of the other fish in the tank.
They are breathing normally.
How often do I feed my fish?
You should feed your fish two to three times daily. A few flakes per fish is sufficient. The fish should eat all the food in two minutes or less. Overfeeding can cloud your water and harm your fish.
Where do you put the fish when cleaning the tank?
Use a small bowl, mug or cup that has been thoroughly rinsed with distilled water as a temporary tank. Never place fish in containers that have been washed with soaps, as even a small amount of residue can be toxic. In a pinch, you can also use a large plastic zip bag.
When you flush a fish down the toilet where does it go?
As experts were quick to point out following the movie’s release, flushed fish typically die long before they reach the ocean, going into shock upon immersion in the toilet’s cold water, succumbing to the noxious chemicals found in the sewage system, or—if they make it this far—finding themselves eliminated at a water
How do you change fish water?
Clean the inside of the glass. Use a sponge to gently remove any buildup on the glass inside your fish tank.
Prepare your buckets. You’ll need one bucket for newly mixed saltwater (for saltwater fish) and another to empty existing tank water into.
Once the inside glass is clean, remove rocks, artificial plants, and decorations that have significant algae growth or are noticeably dirty. Do not clean them with soap or detergents. It’s very difficult to completely remove soap, and even a trace can be harmful to fish.
How do I keep my fish tank water clear?
Ways to Keep Your Aquarium Clean
Use a Proper Filter. The best way to keep an aquarium clean is with a proper filter for the tank’s type and size.
Change the Water Regularly.
Feed Fish Correctly.
Welcome an Algae Eater.
Take Time to Clean the Tank.
Clean the Outside of the Tank.
How do I keep my fish tank healthy?
10 Key Tips to Keeping a Healthy Aquarium
Properly condition your water.
Acclimate your fish to the water.
Float fish in their bag.
Maintain pH balance and other chemical levels.
Make sure water temperature is right.
Change water regularly.
Clean tank glass and other structures.
Choose the right size for your tank.
How do I change the water in my fish tank without killing the fish?
A 25% change is a good partial water change. Check temperature, dechlorinate and pour slowly back into the tank, and you should have no problems. If there is an emergency like high ammonia and nitrite, change 50% on a daily basis until those levels have come back down.
Why are my fish dying in my tank?
There are many reasons why fish in your tank keep dying. A few reasons include stress, incorrect tank setup, overfeeding, diseases, and much more. To a beginner, it could look like your fish died for no reason whatsoever.