Who makes a 10ft jon boat?

Lund® Jon Boat 1040 – 10 Foot Small Boat for Ponds and Panfish.

Which jon boat is smallest?

8 feet (2.5 m) long Jon boat

This Jon boat has the smallest size with a minimal weight capacity. It is practical for one passenger but unstable, making it inadequate for deep waters.

Who makes a 10ft jon boat? – Related Questions

What are the disadvantages of a Jon boat?

This design does have a drawback, which is that Jon boats don’t work particularly well for rough waters. Jon boats really come into their own in shallow waters and water with lots of mud, muck, or obstacles in it. They work well in swamps, mudflats, and other similar areas.

What’s better flat bottom or V bottom boat?

While a deep V boat can’t take you as far into shallow waters or stay as stable in calm waters as a flat bottom boat, they deal with choppy water far better that their flat bottomed cousins. In addition to having what it takes to brave choppy waters, a deep V boat will keep you much drier.

What are the sizes of jon boats?

Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed.

Is a 12 foot jon boat big enough?

8-12 foot boats work great for small area-exploration. 14-16 foot jon boats work great for water sports and utility work. 18+ foot boats are for utility and commercial use.

How fast does a 25 hp jon boat go?

I have owned a 1652 Seaark which for a time I ran on 25 hp. It was slow, topping out at about 22 mph with just me and my gear. With three fisherman and full gear it was very difficult to even get on plane. I would guess that a 1660 would perform even worse.

How big of a boat will a 9.9 push?

To answer the question posted “Best size aluminum boat for 9.9hp 2-stroke?” A 12ft would provide the best performance with a 9.9. If you want more boat space then a 14ft would be better but would perform best with a larger motor.

How fast is a 10 HP boat?

Note: Many factors can affect the real-world performance of the 10 HP outboard motor, including the boat type, load, weather, battery type and capacity. That’s to say, with one single charge, you can go over 40 miles at 5 mph speed.

How fast will a 12 foot aluminum boat go?

12 Foot Jon Boat Speed

10-15 mph is a good expectation for this boat size. This boat length will usually allow for a 5hp engine, with some models permitting up to 10hp engines.

How fast will a trolling motor push a jon boat?

A jon boat powered by a trolling motor can go up to 4 to 5 miles per hour, but it’s rare to reach these top speeds. In most cases you can expect a speed between 2 and 3 mph at maximum throttle.

How fast does a 9.9 Evinrude go?

The propeller is 9 1/4″ diameter x 8″ pitch. (Stock is 9 1/4″ x 10″) Top speed is 20 mph on the GPS.

How fast will a 9.9 Mercury push a 14ft jon boat?

Assuming this is a light 14′ utility boat and a standard 9.9, Mercury would recommend a 8.5 to 9.5 pitch prop for the OP’s application and predicts a top speed around 20 mph.

How much is a Mercury 9.9 Pro Kicker?

Mercury Marine 9.9EXLPT ProKicker EFI FourStroke • $3,238

Fast, reliable starting and controlled throttle response in all weather.

How much does a Mercury 9.9 weight?

The Mercury 9.9 HP outboard engine is a two cylinder four-stroke marine engine that delivers smooth, quiet, fuel efficient power. Weighing 84 lbs., the Mercury 9.9 HP Outboard Model # 9.9MH comes equipped with a manual start and 15 inch short shaft, tiller steering and auto ratchet manual tilt.

What does a 9.9 Yamaha weigh?

87 lbs