As we mentioned in the intro, yes, it’s possible to use an electric pump for inflating your SUP board. In fact, some paddle board brands make electric pumps specifically for inflatable boards.
How do you use a sevylor pump?
Using the pump is also very straightforward. Turn it on – Select PSI, KPA or BAR – Use the plus and minus buttons to select the amount of PSI you want your board inflated to – Hit the power button again.
Can I inflate my paddle board with an electric pump?
Inflate SUP using an electric pump
The inflation process using an E-pump is very similar to the manual pump. After you have the board laid out and the hose connected, connect your pump to a power source like your car or a battery, turn on the power, select your desired PSI and hit go.
What is the best pump for a SUP? – Related Questions
Can you use any electric pump for a paddleboard?
It’s worth noting your average car tyre pump that plugs into the 12v socket in your car will not be powerful enough to inflate your board. Only buy the Schrader Valve adaptor if you have access to a high-pressure airline.
How long does it take to inflate a SUP with an electric pump?
The length of time it takes to inflate your SUP will depend on the type of pump you are using. With a regular hand pump it will take anywhere from 6 – 10 minutes depending on how fast you pump. With a good SUP electric pump it will take 6-8 minutes depending on the size of the board.
Can I use air compressor to inflate paddle board?
Using a compressor allows you to not only inflate your SUP very quickly but also to get it as rigid as it needs to be to perform well.
Can you fill a SUP with an air compressor?
As a general rule, all inflatable SUPs can be pumped up with a compressor. There are portable inflator tools that are specifically made for iSUPs. A less popular option is to use any regular air compressor in combination with a valve adapter.
Most pumps come with universal valve adaptors, but specifically look for a pump that adapts to the Halkey-Roberts, H3, and Bravo valves – which are the most popular valves used worldwide.
Is higher PSI better for SUP?
PSI for inflatable SUP’s can vary from 10 – 20 PSI. Basically the higher the PSI number, the harder the board is going to be. Making sure your SUP is inflated to the proper air pressure will ensure: that it performs well.
Can I leave my paddle board inflated?
LEAVING THE BOARD INFLATED
The answer is yes you can BUT please store it away from the elements, in a cool area out of direct sunlight and ideally off the ground. All inflatable paddle boards will lose some air pressure over time if the board is left inflated day after day.
Is it better to store SUP inflated or deflated?
There is no rule saying you can’t leave your paddle board inflated; however, we strongly recommend that if you’re leaving your SUP in storage for long periods of time, you should deflate it to keep it in its best possible condition.
Should you wax the bottom of a paddle board?
Unlike surfboards, paddleboards don’t need waxing or yearly maintenance to maintain performance. However, it’s a good practice to inspect your board routinely for scratches or dings that may need repair.
What PSI should my SUP be?
The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.
Pump, pump, pump and you’ll see the gauge needle dance around a bit. Once you reach 12-15psi, the needle will hold it’s position a little better, however, the gauge will only read while you are pumping and the air is being pushed into the board.
How do I know when my paddle board is full?
The pump gauge will not register a psi until it gets to at least 7 psi. Inflate paddle board and you will begin to visibly see the board inflating. The last 30-40 pumps will be fairly difficult. When you think the board is fully inflated, take a minute break and then give it 10-20 more pumps.