How much is a 12 ft Jon boat worth?

The purchasing price of a Jon boat will depend on its make, size, construction material and the number of modifications made to the boat. A cheap 12 ft polythene Jon boat can be bought for as little as $550 while an 12 ft aluminum Jon boat can cost as much as $3000. High-end 21 ft Jon boats can cost as much as $30,000.

Is a 12 foot Jon boat big enough?

8-12 foot boats work great for small area-exploration. 14-16 foot jon boats work great for water sports and utility work. 18+ foot boats are for utility and commercial use.

How much is a 12 ft Jon boat worth? – Related Questions

How many people can fit on a 12ft jon boat?

That’s really only enough for the two people and perhaps some tackle and a cool box. As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs. At 16 foot in length a Jon boat can usually hold about 1,000 lbs.

What are the disadvantages of a jon boat?

This design does have a drawback, which is that Jon boats don’t work particularly well for rough waters. Jon boats really come into their own in shallow waters and water with lots of mud, muck, or obstacles in it. They work well in swamps, mudflats, and other similar areas.

How do you stabilize a 12 foot jon boat?

The best way to stabilize an unstable jon boat is to identify the cause of instability, make modifications to address this issue by either increasing the width or adding buoyancy to your boat.

What size boat do I need for a family of 4?

An average family of four will need at least 15 feet (4.6 m) long boat. However, that size can vary from 13 to 18 feet (4 – 5.5 m), depending on its type and purpose.

How stable are jon boats?

Jon boats are known to be flat bottomed boats, which offer users a very stable ride. This is one of the reasons that so many jon boats are used for fishing and for utility reasons around a marina. You can easily get in and out of them as well as move around while you are on the water.

Do jon boats tip over easy?

A Jon boat is very difficult to flip. Jon boats will not flip when they are used in the correct marine environments and under the correct conditions for which they were designed. On calm water a Jon boat is one of the most stable watercraft you can use. Even in relatively choppy water a Jon boat will remain stable.

Can a jon boat tip over?

A jon boat which is unstable on the water is definitely unsafe for use because it could easily tip over. However, almost all things that can make a jon boat unstable can be controlled. Some examples include exceeding the boat’s carrying capacity and uneven distribution of weight in the boat.

What is the weight limit on a 12 foot jon boat?

An average 12 feet (3.65 m) long Jon boat weighs 120 pounds (54.5 kg), excluding an engine. It can hold about 400 to 450 pounds (181.5 – 204 kg) of extra load.

How much horsepower do I need for a 12 foot boat?

15 to 25 HP engine

12 to 16 feet (3.65 – 5 m) long Jon boat, fiberglass boat, and aluminum fishing boat.

How long do jon boats last?

But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime. Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.

Why do they call it a Jon boat?

Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. What is this? Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself. And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.

How long will a welded aluminum boat last?

A very high material strength, good corrosion resistance, and other advantages of aluminum makes it possible for an aluminum boat to easily live 30-40 years.

Do riveted boats leak?

Rivets leak because wear and tear eventually loosens them, causing gaps where water can get through. There are a couple of ways to find leaking rivets. The first way is to fill the boat with water (easier to do while it’s on the trailer), or fill it part way with water, and use a marker to circle any rivets that leak.

Is flex seal good for aluminum boats?

Does flex seal work on aluminum boats? Yes, it does. Some products from Flex Seal can adhere to various surfaces, which include aluminum. The exemptions are plastic and rubber.