Jon Boat Costs
You can find a 12 feet (3.65 m) polythene Jon boat for only $550, while an aluminum model of the same length will cost you about $3,000. If you have an unlimited budget and higher demands, you can purchase a high-end 21 feet (6.4 m) long Jon boat for $30,000.
An average 12 feet (3.65 m) long Jon boat weighs 120 pounds (54.5 kg), excluding an engine. It can hold about 400 to 450 pounds (181.5 – 204 kg) of extra load.
15 to 25 HP engine
12 to 16 feet (3.65 – 5 m) long Jon boat, fiberglass boat, and aluminum fishing boat.
12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP, however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more.
How much does a 12 ft jon boat cost? – Related Questions
8-12 foot boats work great for small area-exploration. 14-16 foot jon boats work great for water sports and utility work. 18+ foot boats are for utility and commercial use.
How big of a boat will a 9.9 push?
To answer the question posted “Best size aluminum boat for 9.9hp 2-stroke?” A 12ft would provide the best performance with a 9.9. If you want more boat space then a 14ft would be better but would perform best with a larger motor.
Trolling Motor Thrust Guide
| Boat Weight (lbs) |
1,000 |
1,500 |
| Boat Length |
Sub 14′ |
15-16′ |
| Minimum Thrust |
30 |
40 |
| Performance Thrust* |
40 |
50 |
| Motor Voltage |
12v |
12v |
It depends on the boat. Some 14’s are wide and deep and could handle a 25 while others are narrow and shallow and would be scary at any higher speed or even sitting still with all that weight. A 15 hp is a good compromise, same weight as a 9.9 and enough speed.
How fast is a 9.9 hp boat motor?
Assuming this is a light 14′ utility boat and a standard 9.9, Mercury would recommend a 8.5 to 9.5 pitch prop for the OP’s application and predicts a top speed around 20 mph. In my experience with similar craft and outboards, this sounds very reasonable.
How fast does a 25 hp jon boat go?
I have owned a 1652 Seaark which for a time I ran on 25 hp. It was slow, topping out at about 22 mph with just me and my gear. With three fisherman and full gear it was very difficult to even get on plane. I would guess that a 1660 would perform even worse.
How fast is a 10 HP boat?
Note: Many factors can affect the real-world performance of the 10 HP outboard motor, including the boat type, load, weather, battery type and capacity. That’s to say, with one single charge, you can go over 40 miles at 5 mph speed.
How fast will a 5 hp outboard go?
Depending on the size and weight of the boat, a vessel with a 5ph motor can go 4 to 6 knots or 4 to 7 mph in ideal conditions. However, the top speed of a boat motor can be affected by the number of passengers and the brand of the boat motor.
The max rated horsepower for most 14′ boats is 15hp unless they are the wider ones. I have a 1452 with a 25 that is great. Also have a 1436 that does well with an 8hp but rated up to an 15 and would be very dangerous with a 25.
You should hit 20-25 MPH. It hit 20 with an aluminum 14′ with a Yamaha 9.9, 6 gallon tank, and group 29 battery.
How fast can a 3.5 hp engine go?
How fast can a 3.5 hp engine go?
| RPM |
Speed |
| Minimum |
3.3 knots |
| Medium |
7.5 knots |
| Max |
12 knots (15 knots with one single person on board) |
Can you pull a tube with a 15 hp outboard?
Can you pull a tube with a 15 HP outboard? While it’s possible to tow a small child under 45lbs with a 15HP outboard engine, skiing behind a boat with such little engine power is typically challenging.
How fast does a boat need to go to pull a skier?
In general, for someone to waterski or wakeboard, the boat needs to be moving at least 20 miles per hour, usually closer to 26 or 27. Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing.
How fast does a boat need to go to pull a tube?
According to Blain’s Farm and Fleet, the recommended speed for tubing is between 20 and 25 mph. In addition to safety reasons, pulling a rider too fast and constantly knocking them into the water often makes them not want to do it again.
How much horsepower do you need to pull a skier?
> that you are gonna be a lot happier with 100-150 HP at least. can easily ski behind a 75 h.p. motor because I have done it many times. minimum hp requirements. required hp must be below 75.
Can you ski behind a 75 hp motor?
A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.