A blog about boats, fishing, water sports and having fun on the ocean
How do you use a Texas rig for fishing?
by
Texas rigging allows you to keep the bait tight to cover without getting snagged. Simply cast the rig out and let it fall to the bottom.Sweep your rod in 2-3 foot increments, then reel in the line after each pull. This creates a pause between drags which allow the bass to catch up and commit to the bait.
With any Texas-rig setup, you need to start with a bullet-shape slip sinker or nose weight placed on the line in front of the knot and hook. The common weights used for Texas rigging can range from 1/32 ounce up to 2 ounces.
What is the Texas rig best for?
The Texas rig (sometimes just written as T-rig) gives you a way to fish soft plastics into and through anything from light to heavy cover – with a very low risk of getting hung up. At the same time, the use of a soft plastic bait allows you to keep your fish hook-up ratio high.
How do you use a Texas rig for fishing? – Related Questions
Should hook be exposed Texas rig?
With a Texas rig, less fish will be hooked than with a Texpose because the hook point is not exposed; however, the occluded point deters hang ups on debris. The Texpose does not increase bite rate, but its exposed point increases the chance a biting fish will be hooked.
What size rod is best for Texas rig?
Texas Rig Rods
Look for a casting rod in the 7′ – 7’6” range with a medium-heavy to heavy power and a fast to moderate-fast taper to cover most scenarios.
What action is best for Texas rig?
For fishing a Texas rig, the rod choices are a medium, medium-heavy or heavy action rod. The popular choice of many anglers today is a medium-heavy action rod with a long split handle. When fishing a Texas rig, almost any reel will work, but most will use a baitcasting reel.
Is Texas rig good for bass?
Pitching a Texas-rigged creature bait with a 3/8-ounce weight around stumps, laydowns, docks and submerged vegetation is a great way to trigger strikes when the bass are a little more finicky up shallow.
Is a Texas rig good for weeds?
Pitching or flipping Texas rigs to heavy cover is ideal for cold-front situations since bass tend to hold tight to the cover when bluebird skies prevail. Punching weed mats with Texas rigs is the best way to lure bass out of the vegetation when the weather is calm and sunny.
What does a Texas rig imitate?
The Texas rig was one of the first ways to rig soft-plastics weedless and fish them without the lure becoming hung. Probably the first plastic worms were invented to mimic night crawlers or earthworms, but there also are soft-plastic lures that resemble crawfish, lizards, creature baits and baitfish.
The Texas Rig is a technique used for fishing soft plastic lures. It involves a bullet weight being threaded onto the line first followed by an optional glass or plastic bead, and then the line is secured to a hook, usually an offset worm hook.
Do you need glass bead for Texas rig?
Use a bead for added sound and knot durability
For whatever reason, it seems like a lot of anglers overlook the importance of adding sound to their Texas-rigged soft plastics. Sometimes I’ll insert small glass rattles into the plastic, but I really like adding a glass or plastic bead.
What weight is best for Texas rig?
A 1/8-ounce weight is best for creating a slow-falling lure in shallow water. Sinkers in the 1/4-, 5/16- and 3/8-ounce sizes are best for fishing sparse cover or brush piles less than 20 feet deep. A 1/2-ounce weight is ideal for pitching into thick bushes or for bass holding on the bottom deeper than 20 feet.
Is braid good for Texas rig?
Texas Rig – When fishing offshore, I go with fluorocarbon, again because it sinks and has low stretch. I use 15 to 20-pound test depending on the cover and clarity. But when fishing a Texas rig in shallow, stained water around heavy cover, I’ll often move to braided line, 30 to 40-pound test depending on cover.
Can you fish a Texas rig in deep water?
Texas rigs can be used from shallow to deep, in cover or open areas. Two ways that T-rigs are used: 1) hook and lure with no weight (top) and 2) hook and lure with sliding weight (bottom). It is simple to rig: slide a bullet or flipping weight on your line and tie on a hook.
There are three basic types of hooks that I would recommend: straight shank, offset round bend and offset wide gap. Each of the three types have unique and situational benefits when using a Texas rig.
How far should my hook be from my weight?
Depending on the depth, the distance from the hook to the weight needs to be adjusted. For shallower water, it is recommended to place your hook three to six inches above the weight. For deeper water, the hook can be adjusted to nine inches from the weight to no more than a foot and a half because of the leverage.
Should sinker be above or below hook?
A sinker is a weight attached to your fishing line about 6 – 10 inches above the hook. It forces a hook with bait to sink and keeps your bait down near the lake or river bottom, where most fish swim. For most shore fishing, pinch on one or two small split-shot sinkers on your line. Use only enough to sink the bait.
What goes first hook or sinker?
STANDARD RIGS & SPECIALTY RIGS
Tie a hook on the end of your fishing line with one of your fishing knots.
Pinch one or two small split shot sinkers to your main line about 6-12 inches from the hook to add a bit of weight to your line (this will keep your bait suspended vertically).
Do you put the weight above the hook?
When adding the weight to the line, apply the sinkers roughly a foot and a half above the hook itself. Pass the line through the opening of the sinker and pinch it shut tightly with either your hand or a pair of pliers to make sure it is fastened as securely as possible.