Faux teak, is a non-porous composite material that looks like high quality natural teak. faux teak is low maintenance, more durable, and lighter than natural teak. Faux teak is splinter and crack-free, as well as weather, water, and UV resistant. It is also immune to rot and insects.
How thick is teak decking on a boat?
Now, teak is primarily a covering to the boat’s structural subdeck. New teak decks are typically only 10 to 20 mm (3/8 to 3/4”) thick.
What is teak decking?
Teak Decking
It is a naturally hard dense wood and great for outdoor use. Our Teak is kiln dried and perfect for your next project! Teak has a 50+ year life span. Our Teakwood lumber is available in 1X6 (net 3/4″ X 5″) S4S, Grooved, Siding or T&G in 8′, 9′, 10′, 11′ and 12′ lengths.
How do you install faux teak decking on a boat? – Related Questions
Greenheart is the next best option when compared with teak, it has very similar properties and is equally tough and durable. It’s natural oils produce a deep brown colour and give it natural resistance to rot and moisture buildup allowing it to be left untreated and can stand strong for over 20 years.
How long do teak boat decks last?
Durability – A ½” thick teak deck well cared for will last 15-20 years, depending on the environment. A painted non-skid deck lasts 5-8 years. A composite deck lasts 5-20 years depending on its quality. (High quality, long-lasting composite decks are not much less expensive than teak.)
Is teak a good wood for decking?
Teak wood is one of hardest deck wood options and will not splinter over time like other softer woods. Because it is naturally water resistant, teak wood will not warp or crack from exposure to wet environments, and does not require the use of a sealant to protect it.
How do you maintain a teak deck?
Our advice is to wash it regularly as you would with any deck with fresh or saltwater using only a soft brush. Once or twice a year it is recommended you clean teak boat decking with a specialist teak deck cleaner. Follow the manufacturers’ directions and make sure you gently scrub across the direction of the grain.
Does teak decking get hot?
Teak can get pretty warm when sitting out in the sun, but a PVC deck gets even warmer—around 150 degrees F on a hot sunny day, according to Bill Gribble, president of Ohio-based PlasDECK Inc.
How much is teak deck?
Multiple factors affect teak decking costs including materials, design, and installation. In this article, we address how the cost of yacht-quality teak affects the typical $85-125/sq ft cost of the teak decking (not including installation).
The cost of Flexiteek is roughly $40 to $42 per square foot, and the product comes with a five-year warranty.
What is the best decking for a boat?
What Is The Best Decking For a Boat Dock?
Wood Decking. Wood decking is often the first choice because it is durable and has natural oils and tannins that prevent decay, rot, and insect invasion.
Aluminum decking.
Treated wood.
Composite decking.
PVC Decking.
What is synthetic teak made of?
PVC decks. This option has historically offered some of the most convincing alternative teak products, with the grain, texture, impact resistance and non-slip properties of the real thing. As a result many of the new yachts seen at boat shows actually have simulated teak decks made of PVC.
What is the best synthetic teak decking for boats?
Nuteak is the most realistic synthetic option compared to other faux teak decking for boats. Nuteak is non-slip or non-skid, wet or dry for safety under any conditions. Nuteak costs less than teak and lasts longer with less hours spent on maintenance.
How much does SeaDek flooring cost?
The price for a SeaDek depends on the sheet’s size. The smallest, measuring 18 by 38 inches, costs $43.99. The largest and most expensive sheet is 40 by 80 inches and retails for $174.99. How much it will cost you depends on your boat’s size and how many sheets you’ll need.
How do you clean synthetic teak?
Firstly rinse the teak surfaces to remove any loose dirt or grime. Dilute 50mle of synthetic teak cleaner in 5 litres of warm water, stir and apply with a sponge or stiff brush. Apply to the whole surface and rinse thoroughly with warm, clean water – allow the area to dry before applying the synthetic teak sealer.
For bad scuffs or small burns such as those caused by a cigarette, or a stubborn stain that has been left to dry, the deck can be lightly sanded by hand with 40 grit sandpaper. This is also effective treatment when an area has worn smooth.
How do you remove blood from SeaDek?
To remove fish blood, use 1 cup bleach to 1 gallon of warm water and soft bristled boat brush. Mix bleach and water take soft bristled brush and dunk in water. In a circular motion clean SeaDek until fish blood is up. Rinse with water.
How do you clean flex teak?
Use warm water with soap associate with regular brush (along PVC fiber grain) will clean off stains, spots on flexiteek surface, otherwise, acetone, sand paper will be applied to clean off those deep spots..
What is flexiteek made of?
Flexiteek is a synthetic teak panel and it is made of composite materials, 100% recyclable to other products and its non–slip quality is superb and nobody yet on first viewing or touching think it is anything other than real teak. The deck will not fade, dry out, split or crack and requires minimal maintenance.