A blog about boats, fishing, water sports and having fun on the ocean
How do I know what size bearings for my boat trailer?
by
The easiest way to determine which bearings are used on your trailer axle is to take the hub off and check for the numbers stamped into the bearings. If the bearing numbers cannot be read, the next best solution is to find the bearings’ inner diameter.
How often should you change bearings on a boat trailer?
Expert Reply: We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles.
How much does it cost to put new bearings on a boat trailer?
So, how much does it cost to pack wheel bearings on a trailer? Surprising little, expect to pay as little as $100 and at most $400. If you want to save some money you can do it yourself, but in my opinion, it’s not worth it unless you have ample experience and all the necessary tools.
How often should you grease wheel bearings on a boat trailer?
For boat trailers, manufacturers recommend replacing the grease, which means removing, repacking, and reassembling each wheel on the trailer, every 3,000 to 4,000 miles, or annually even if you don’t travel very far.
How do I know what size bearings for my boat trailer? – Related Questions
Can you over grease trailer bearings?
Too much grease volume (over greasing) in a bearing cavity will cause the rotating bearing elements to begin roiling the grease, pushing it out of the way, resulting in energy loss and increasing temperatures. This can result in accelerated wear of the rolling elements and then component failure.
Are bearing buddies worth it?
Expert Reply: Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it’s very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road trips so the would work well for you.
How do I know if my trailer bearings need grease?
Place your hand on each of the wheel hubs of the trailer. If it is too warm to hold your hand in place, you may have a bad bearing. The wheel bearing may; require lubrication, be bad or not have enough play.
How often do you grease EZ Lube trailer bearings?
Proper lubrication is essential to the proper function and reliability of your trailer axle. Bearings should be lubricated every 12 months or 12,000 miles.
What is the best grease for boat trailer bearings?
White lithium grease is a multipurpose grease and is ideal for metal on metal lubrication, so you can use this for your wheel bearings, for instance. It’s also a superior corrosion-resistant formula, which is another reason it’s helpful in bearings and other parts that get routine exposure to the water.
How do you grease a boat trailer wheel bearing?
How tight should boat trailer bearings be?
Should I fill my trailer hub with grease?
How do you keep water out of boat trailer bearings?
Grease-Filled Protection
Grease is kept around your boat trailer bearings by a seal on one side of the hub (preferably a double-lipped seal) and pressure from froma rubber plug or grommet positioned on the outside of the hub. But there are variations on this technique.
Is Lucas Marine Grease good for wheel bearings?
Lucas Marine Grease is a truly universal marine grease with applications in trailer wheel bearing, trailer chassis lubrication and outboards. It also has crossover applications in automotive wheel bearing and chassis lubrication.
Is White lithium grease good for bearings?
Did you know a spray of WD-40 Specialist White Lithium Grease is a great lithium lubricant for bearings? It reduces friction on bearings and helps keep them protected from rust as well. Simply apply by spraying directly onto the area.
Is Marine grease OK for wheel bearings?
As a rule, marine grease should be used in any marine application including trailer wheel bearings, steering assemblies or any other parts that require grease.
Is red and tacky good for boat trailers?
Red N Tacky has a red Lithium Complex Base that is red in color, forming an effective seal to minimize bearing and hub contamination, with resistance to water washout on boat trailers. This item comes in a 14.5 oz tube that will fit into any standard size grease gun.
Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.
Is red and tacky grease good for wheel bearings?
Lucas Red “N” Tacky is a well-known, high-performance grease suitable for a range of automotive applications, including use as wheel bearing grease. Its long shelf life, high tackiness, and extreme pressure resistance make it a favorite among enthusiasts.
Can you mix Marine grease with regular grease?
Don’t Mix Grease, but Change If Needed
grease if your use demands it. Most automotive components are lubricated with lithium grease, but if you use your 4X4 or AWD mainly for off-roading, switching to a calcium marine grease might be beneficial. The key is to make the switch as close to 100 percent as possible.