From the line of riveted TOPPER™ models to the extra-rugged, all-welded GRIZZLY® boats, TRACKER® has a jon boat that meets your needs just right. Whichever you choose, you will receive top-quality, long-lasting construction.
Does tracker still make riveted jon boats?
The TRACKER® TOPPER™ 1542 jon boat is built TRACKER-tough to give you and your family years of fishing fun! At just 190-lbs., it can be loaded on the roof rack of some vehicles and in the beds of some trucks.
Description.
| Length |
15′ 0″ |
| Beam |
5′ 0″ |
| Bottom width |
3′ 6″ |
| Max. recommended HP |
25 HP |
| Max. person capacity |
3 persons |
What is a 1236 jon boat?
The powerboat Alumacraft 1236 JON Sierra had been produced by the brand Alumacraft since 2012 to 2019. Alumacraft 1236 JON Sierra is a 3.70 meters aluminium boat with accommodation for 3 people and the draft of 0.20 meters. The powerboat with aluminum hull has CE certification class (D) and can go in protected waters.
How wide is a 1436 jon boat at the top?
Specifications
| Length |
4.22 m |
13′ 10” |
| Beam |
1.35 m |
4′ 5” |
| Bottom Width |
91.44 cm |
3′ |
| Max. Recommended HP |
15 HP |
|
| Max. Person Capacity (Canada) |
2 persons |
|
Does tracker still make Topper Jon Boats? – Related Questions
12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP, however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more.
An average 160 pounds (72.5 kg) heavy and 14 feet (4.3 m) long Jon boat without an engine can hold 610 pounds (277 kg) of gear and passenger. The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.
How long do jon boats last?
But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime. Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.
How deep does a Jon boat sit in the water?
Since a Jon boat won’t submerge much in the water due to its hull design, it can be used in shallow waters where depth will be low (around 3 feet or less).
Can jon boats go in the ocean?
Many saltwater anglers have made the switch back to aluminum Jon boats after “having a go” with bigger fiberglass vessels in previous years. Aluminum costs very little to operate and can go almost anywhere, given the right weather conditions.
Where is the width measured on a Jon boat?
Jon boats are measured both in width and length. To find the length, you measure from the center of the transom (rear of the boat) to the bow or front tip of the jon boat. To determine the width of a jon boat, measurements are taken on the beam width in the middle part of the boat.
How wide is a standard Jon boat?
On average, the width of a Jon boat will fall between a beam width of 48 inches for a 10 foot, 60 inches wide for a 12-foot boat, and about 70 inches wide for a 14-foot Jon boat. Typically, the length falls between 8 to 24 feet, inches ranging between 32 and 60.
How wide is a 14 ft Jon boat?
14 feet (4.3 m) long Jon boat
This 60 to 70 inches (1.5 – 1.8 m) wide Jon boat comes with a bow decked area and two bench seats.
How wide is a Jon boat?
Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed. Many users choose to cover the ribs, producing a flat, level surface.
How shallow of water can a jon boat run in?
4″ is getting somewhat shallow, and 2″ or less is the desired result. A standard well setup tunnel hull can run in 4″ all day long, takes a foot to get up, but up and going will run shallow. My jet can run in less than 2″ easy, less than that if it’s a hard sand bottom.
Are jon boats stable in rough water?
Jon boats are not as safe or stable as V-hull boats in choppy or turbulent water. However, in calm, shallow water, jon boats are incredibly safe as long as you don’t add to much weight or exceed speed recommendations.
How long do jon boats last?
But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime. Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.
Do jon boats tip over easy?
A Jon boat is very difficult to flip. Jon boats will not flip when they are used in the correct marine environments and under the correct conditions for which they were designed. On calm water a Jon boat is one of the most stable watercraft you can use. Even in relatively choppy water a Jon boat will remain stable.
How many hours is considered old for a boat?
If you are looking at a marine gasoline-powered boat to purchase that has reached 1500 hours, this is considered a lot. Unless it has been meticulously maintained, its dependability is very questionable. Properly maintained diesel engines give boaters 5000 or more hours of dependable service.
How much is a 12ft aluminum jon boat worth?
Jon Boat Costs
You can find a 12 feet (3.65 m) polythene Jon boat for only $550, while an aluminum model of the same length will cost you about $3,000.
Do old boats hold their value?
In general, boats lose about 36% of their value after 10 years of ownership. Boats lose between 23% and 30% after 5 years and between 18% and 22% after only 1 year of ownership from a new current year purchase. This is considering the boat being properly maintained and kept in good overall condition.