Cooler Seating. Cooler seats are the easiest way to add seating to a boat, bar none.
Hard-Mounted Utility Seat. Robust stainless hardware makes for a sturdy seat that folds out of the way.
Cushioned Folding Deck Chair.
The Bean Bag.
Why are center console boats better?
Center Console Advantages
Since there’s no cabin nor accommodations, they’re often a bit less expensive than similar sized express or convertible boats. They also tend to be lighter than these other designs, which means they can perform better with equal horsepower, have more range, and are easier to trailer.
Can boat seats be replaced?
Refurbishing your upholstery can be a good option, but other boaters opt to go with replacement boat seats and chairs that you can install yourself. Oftentimes, these will exceed in quality of original equipment and bring an updated style to your boat, giving it a fresh new overall look.
Can you add seating to a center console boat? – Related Questions
Can I reupholster my own boat seats?
If your boat seats are starting to show the ravages of time, you can get them looking as good as new with your own reupholster project. As well as replacing the boat seat vinyl and foam, it also gives you the opportunity to change up colors of the covers if you wish.
How do you fix sun damaged boat seats?
Rinse the upholstery with water and air dry. Spray a fine mist of Marine upholstery protectant directly on the material and rub it in with a cloth or old towel. Continue spraying the protectant on the material and rubbing it into the upholstery until the material is glistening. Then allow it to air dry.
How do you fix a cracked vinyl boat seat?
Duct tape is a quick fix if you get a tear, but it’s not a long-term solution. You can also purchase a vinyl patch repair kit as a short-term option to seal up the tear. However, it may be more cost-effective to replace the marine-grade vinyl on your seat cushion.
How do you remove a boat seat?
How to Remove Boat Seats
If your seat is attached to the boat with screws, you can remove them using a screwdriver.
If your seat is attached with bolts, you can remove them using a wrench.
If your seat is attached with rivets, you can remove them using a hammer and chisel.
Unscrew the bolts that are holding the seat in place.
Remove the seat from the boat.
Replace the seat with a new one by screwing in the new seat’s bolts. Make sure to tighten the bolts so the seat is secure.
What is the best foam for boat cushions?
Medium Density foam is great for boat seats, patio cushions and occasional indoor seating. In fact, OEM boat manufacturers commonly choose antimicrobial polyurethane foam for boat seating.
How are boat cushions attached?
I love going to boat shows, especially to investigate how all of the new boats keep their cushions attached. Traditionally cushions were snapped or screwed through boat rails and/or secured via T-nuts or spider bolts to wood bases. Now there are such options as ridged plastic Velcro found in industrial-supplies stores.
How do you sew marine vinyl piping?
Can a regular sewing machine sew marine vinyl?
Sewing Marine Vinyl is actually pretty easy. The biggest difference between sewing Marine Vinyl and other fabrics is the thickness. If the fabric is too thick you will need an industrial sewing machine. Our Marine Vinyl Fabric can be used with most regular sewing machines.
Do I need a special needle to sew vinyl?
Generally you can stitch through vinyl with a universal needle. However, if you are using a heavier weight of vinyl I would recommend using a wedge point needle or a needle meant for working with leather fabric. This will help ensure even stitching and eliminate any puckers or thread breakage. Hope this helps!
Depending on how thick the vinyl is and how many layers you want to sew, a household sewing machine might not be able to handle this material. Every sewing machine has its limitations. But if the material is thin and you are just sewing 2 layers, you can sew vinyl with a regular machine.
What is the difference between marine vinyl and regular vinyl?
Marine Vinyl and standard vinyl are really the same thing, except marine-grade vinyl has two extra features. It has additional UV protection to prevent the color from fading in sunlight. And it also has antibacterial and antifungal additives to make it mildew resistant.
What thread do you use for boat seats?
As for what weight and strength of thread to use when, Wittenberg says that for most marine and upholstery jobs, a 92 Tex thread is best. For sewing bindings and side curtains, marine fabricators may want to consider using a 69 Tex thread, which offers a higher yield per spool.
What needle should I use for vinyl?
When choosing a needle to use with clear vinyl, use a leather needle size 90/14 or denim needle size 90/14. I recommend a strong, 100% polyester thread. Update your stitch length to 3.0mm or higher. When sewing with clear vinyl, the needle holes remain in the material after stitching.
How do you flatten vinyl seams?
If you have a few seams you would like to fix yourself, here is a recap of what to do:
Start by cleaning the area and removing any existing adhesive.
Then heat the seams to soften the vinyl.
Next, apply new adhesive and close the seam as you exert pressure on it.
Then wait for it to dry before applying a seam sealer.