Every boat operator should know the following terms and definitions.
- Bow : Front of a boat.
- Stern : Rear of a boat.
- Starboard : Right side of a boat.
- Port : Left side of a boat.
- Hull : Body of a boat.
- Gunwale : Upper edge of boat’s side (generally pronounced gunnel)
- Cleat : Metal fitting on which a rope can be fastened.
What are the different hulls in boats?
There are four common types of boat hulls.
- Flat-Bottom Hulls. Boats with “flat-bottomed” hulls are very stable, great for fishing and other uses on calm, small bodies of water.
- Round-Bottom Hulls.
- V-Shaped Hulls.
- Multi-Hulled.
What hull means?
1a : the outer covering of a fruit or seed. b : the persistent calyx or involucre that subtends some fruits (such as a strawberry) 2a : the frame or body of a ship or boat exclusive of masts, yards, sails, and rigging. b : the main body of a usually large or heavy craft or vehicle (such as an airship or tank)
What is the bottom of the boat called?
Bilge – The lowest part of a boat hull that sometimes collects water.
What are the parts of a boat called? – Related Questions
What are the four parts of a boat called?
Bow: The forward or front part of your vessel is called the ‘bow’. Port: The left side of your boat when you’re seated and looking forward. Starboard: The right side of your boat when you’re seated and looking forward. Stern: The rear section of your boat is called the ‘stern’.
What is the main body of a boat called?
Hull: the body (shell) of the boat that encompasses other parts like the deck, bottom, and sides. The hull doesn’t include the rigging or mast of a sailing yacht. Keel: a part of the hull, the keel is the primary middle beam running from the front (bow) to the back (stern).
What are the parts of a boat hull called?
Gunwales: The upper edges of the boat’s hull that provide extra rigidity for the hull are called the gunwales. Hull: The body of the boat is called the hull. Keel: The structural backbone of a ship that runs along the bottom of the hull is called the keel.
What are the 3 main parts of a ship?
A ship is like a floating city having several different parts. However, we can’t imagine a ship without its three main parts: The Hull, an engine room and a navigation bridge.
What is the highest part of a boat called?
The Hull
The hull of a boat is the body. This is usually the biggest part of the boat. It runs from the front of the boat to the back and includes the bottom side of the boat that sits on the water.
What is the main cabin on a boat called?
Saloon: A room in the cabin on a boat that’s usually the primary entertaining area. “We served cocktails in the main saloon; it was a great area for entertaining our guests.” Scuppers: Deck drains that channel water from rain and spray overboard. “The cockpit filled with water, but was quickly drained by the scuppers.”
What are the two main parts of a ship?
There are two main parts of a ship: the hull and the machinery. The hull is the actual shell of the ship including her superstructure, Page 3 3 The machinery includes not only the main engines required to drive her but also the auxiliary machinery (boilers, generators, etc.)
What is the trunk of a boat called?
Parts of a Boat
Deck − It is the flat surface area that is present on top of the boat. Bow − The front of the boat having a narrow shape is often termed as bow. Cabin Trunk − On the boat, there is a cabin house. The side and roof of this is known as Cabin Trunk.
What is the stern of a boat?
Stern. The stern of the boat refers to the rear of the boat. Most boats will have seating, a swim platform, a ladder, and an engine located in the stern.
What is the back of a boat called 3 letters?
3 Letters: AFT.
What part of the boat is the beam?
In simple terms, when measuring a ship at the widest point on the waterline that is known as, “Waterline Beam” whereas above, “Beam” is the widest part of the vessel.
Why is it called the stern?
The stern lies opposite the bow, the foremost part of a ship. Originally, the term only referred to the aft port section of the ship, but eventually came to refer to the entire back of a vessel.
What is the strongest part of a ship?
Primary hull bending loads are generally highest near the middle of the ship, and usually very minor past halfway to the bow or stern. being the vertical distance of the center of that section from the neutral axis.
Why do they call it port and starboard?
The word ‘starboard’ is the combination of two old words: stéor (meaning ‘steer’) and bord (meaning ‘the side of a boat’). The left side is called ‘port’ because ships with steerboards or star boards would dock at ports on the opposite side of the steerboard or star.
What is the nose of a boat called?
The bow (/baʊ/) is the forward part of the hull of a ship or boat, the point that is usually most forward when the vessel is underway.
What is the top of a ship called?
The uppermost deck running from the bow to the stern is called the weather deck. The main deck area over the stern is called the fantail or poop deck. The flat part of the bottom of the ship is called the bilge.